Skip to main content

BIGAB 22-27 700208

Are you in need of a larger trailer that can cope with continuous hard work but which treats loads carefully? BIGAB 22–27 is perfect for you. This is a trailer that can be driven on public roads fully loaded but which makes very little impression on sensitive ground. The drawbar attachment is hydraulically sprung with an accumulator. If necessary the load can be transferred from the trailer to the tractor’s drawbar. BIGAB 22-27 is well equipped as standard with, for example, sprung triple axles, with follow-steering/power-steering on the front and rear axles, which makes the unit extremely easy to manoeuvre both while towing and reversing.

The steered axles are controlled from the tractor via a double-action outlet with floating position. The trailer is also equipped with hydraulic control between tipping and exchange, hydraulic container lock, double-action outlet on the tower, load transfer cylinder to the tractor, front and rear half mudguards and electric control valve for the hydraulic functions (pressure and free return) with a control unit in the cab.

Comes standard equipped with 560/60-22,5 tyres. Tyre brand at manufacturer discretion unless advised.

For further information about the equipment of this model or the possibilities of adding extra, please see the headline “Equipment”.

Adoption of national, regional or local requirements beyond CE- approval or equivalent is not the responsibility of the manufacturer. The technical data refer to a standard trailer. Be aware that local regulations might change the need of the technical specification of the trailer. Ask your dealer for more information. 

In case of crane mounting the max load will be decreased by the crane weight. Exact number depends on crane model. 

Bogie type: Sprung tridem axle Two follow-steered/power-steered axles
Wheel dimension in standard 560/60-22,5
Required tractor hydraulics: 1 brake outlet, Electric control valve, pressure and free return with one double action with floating position for steering
Oil volume: Minimum available oil volume, with full system (L) 23
Chassis weight: Standard equipment (Kg) 6600
Chassis length (with drawbar) (mm) with standard drawbar 7550
Width across the wheels (mm) with standard equipment* 2590
Total weight: Country dependent
Max load including container (Kg) 22000
Max load during container exchange (Kg) 21000
Suitable container length (mm) 5 500 - 6 500
Load on tow eye: Depending in the position of the container (Kg) 2500-3500
Max tipping capacity 22000
Max working pressure (MPa) 22.0
*Note! Dimensions might change depending of specific configuration

Trailer Valves



Chassis parts


Traditional Cranes






PTO Pump


Tool box

Do you need more information?

Tom Belton International salesman Phone: +44 7860 951485

Contact us


Tule 30, 765 05 Saue, Estonia