12-15 G2 

BIGAB 12 - 15 G2 is a new Generation of hook lift system. The tipping angle is 60 % which is an increase of 12 degrees to the previous model. The tipping speed is significantly improved. The trailer tips in half time of previous model. When tipping is done you simply lower it through the float/free flow position down to transport position.

The G2 trailer has been equipped with a strong frame lock/bogie blocking for safer and quieter hooking. A powerful duplex hydraulic lock for the frame is standard. The trailer is equipped with bolted drawbar for increased flexibility. The chassis is fully shot - blasted painted in two - component paint for higher UV PROTECTION. Makes the paint harder with lasting glow.


BIGAB 12 - 15 G2 is the model which meets the quality and equipment availability demands of the professional operator. Even though flexible, because of its design, this trailer has maximum strength and rigidity in terms of deformation and twisting. It remains completely stable during both tipping and hooking operations. It s equipped with a sturdy pendulum bogie with strong hubs and eight-hole wheel mountings.

For further information about equipment of this model or the possibilities of adding extra, please see the headline "Equipment".
Adoption of national, regional or local requirements beyond CE- approval or equivalent is not the responsibility of the manufacturer. The technical data refer to a standard trailer. Be aware that local regulations might change the need of the technical specification of the trailer. Ask your dealer for more information. 

A product of FORS MW - A stronger link in the transport chain.



Art. no 700210

In case of crane mounting the max load will be decreased by the crane weight. Exact number depends on crane model.  
Technical data
Bogie type:
Mech. pendulum bogie
Suitable container length (mm)
4 150-4 600
Wheel dimension in standard
Required tractor hydraulics:
1 brake outlet, 4 double action
Oil volume: Minimum available oil volume, with full system (L)
Chassis weight: Standard equipment (kg)
2 750
Chassis length (with drawbar) (mm) with standard drawbar
5 800
Width across the wheels (mm) with standard equipment*
2 300
Total weight (Kg)
Country dependent
Max load including container (Kg)
12 000
Max load during container exchange (Kg)
12 000
Load on tow eye: Depending in the position of the container (Kg)
1 600-2 300
Max tipping capacity (Kg)
12 000
Max working pressure (MPa)
*Note! Dimensions might change depending of specific configuration
12-15 G2

Need more information?


Call Tom to get more information


Phone: + 44 7860 951485

Country :
Tule 30
76505 Saue
Phone: +3726790000
Fax: +3726790001
Org. no: 10094723
VAT no: EE100189685
Tel:  +46(0)11165770
E-mail: aftermarket@forsmw.com
AS FORS MW @ 2021 | Cookies
We reserve the right to alter specifications without prior notice. All images are for illustrative purposes only.